Car key cutting in Tenerife. I cut the key at your car — even with no original.
At Otypro in Tenerife, I cut car keys on-site — a copy from your working key from €40, or a fresh cut with no original from €60.
Updated September 2026
I’m Olexy — whichever job it is, a quick duplicate, a from-scratch cut when you’ve lost everything, or a full cut-and-program, I handle it myself.
Only need the cheapest possible copy? I’ll tell you straight when the hardware-store counter beats me on a plain metal key — my edge is chipped keys and fobs that have to be cut and programmed to start the car. Every route, compared honestly: Hardware store vs a locksmith.
Read this first
What "car key cutting" actually means today
Most people search "car key cutting" expecting a 60-second job at a kiosk. For an older car, that's exactly right — cut the blade and you've got a working key. But almost every car built since roughly 2000 has an immobilizer: a chip in the key that the car's computer has to recognize before the engine will start.
The two jobs hiding inside "key cutting" — the cut and the chip
So on a modern car there are two jobs hiding inside "key cutting." The cut is the mechanical blade — it lets the key slide into the lock and turn. The chip is the electronic half — it has to be programmed to the immobilizer or the car cranks but won't start. A blade cut on the wrong machine, or a chip that was never programmed, leaves you with a key that turns and goes nowhere.
I do both halves at your vehicle. If all you need is a plain blade — a valet key, a glovebox or trunk backup, or a spare for an older car — that’s the cheap, fast end. If your car needs the chip programmed too, that’s a spare key or, with nothing to start from, a lost-all-keys job.
What it costs
How much does car key cutting cost in Tenerife?
Open-ended starting prices. The exact number comes by text before I dispatch, and the number I send is the number you pay. These first two are the mechanical cut only — add programming if your car needs the chip.
Cheapest path
Copy from your key
from €40
Got a key that works? I duplicate the blade on-site. Best for a cheap spare blade, a valet key, or a glovebox/trunk backup. No chip programming in this price. (High-security laser-cut blanks start at €37.)
No original needed
Decode the lock
from €60
Lost every key and nothing to copy? I read the cuts from the lock itself and make a fresh blade from scratch. Many cars I can also cut to the manufacturer code. Ownership verified first.
If your car needs the chip
Cut + program
from €60 / from €200
from €60 transponder, from €200 smart key — the blade cut plus pairing the chip so the car actually starts. Lost every key? That's a lost-all-keys job from €200.
Full breakdown across every service on the pricing page. Cutting a key for a car with no original means confirming you own it first — government photo ID matched to ownership proof (registration or proof of insurance in your name), the same ownership check I follow on lost-key jobs.
Edge-cut vs. laser-cut (sidewinder)
Two kinds of blade, two different machines. Knowing which one your car uses explains why the kiosk turned you away.
Edge-cut
The traditional key — grooves cut along the edges of the blade. Standard on older and economy vehicles. Quick to copy, and what most people picture when they think “get a key cut.”
Laser-cut (sidewinder)
High-security — the groove runs down the centre of the blade, on both sides, instead of along the edges. Standard on most domestic and Asian vehicles from about 2010 onward. It needs a high-security cutting machine — which is exactly why a mall kiosk can’t copy one. I carry the blanks and the machine on hand.
Pricing: a laser-cut blank cut starts at from €37. If your laser-cut key also needs a chip or smart-key programming, the cut is already included in the key price — no separate cut charge. Which key do I have?
Car key cutting questions, answered
If yours isn’t here, just text me. More on the full FAQ page.
Can you cut a car key with no original?
Yes. If you have no key at all, I decode the lock itself to read the cuts and make a fresh blade from scratch — about from €60 for the mechanical cut, with ownership verification first. Many vehicles I can also cut to the manufacturer code. If your car has an immobilizer (most since about 2000), the new key also needs programming to start the engine — that’s priced like a spare or a lost-all-keys job.
Will a freshly cut key start my car?
Only if your car has no immobilizer chip, or the chip is also programmed. A correctly cut blade will fit the lock and turn — but a modern car won’t start until the transponder chip in the key is paired to the immobilizer. Cutting is the mechanical half; programming is the electronic half. I do both, and I’ll tell you in the quote which your car needs.
How much is a basic car key copy in Tenerife?
At Otypro in Tenerife, a straight copy of a working key starts at €40 — that’s the blade duplicated, no programming. Good for a cheap spare blade, a valet key, or a glovebox/trunk backup. Laser-cut (sidewinder) blanks cost a little more than edge-cut, but I carry both on hand. If the key also needs a chip programmed to start the car, that’s the spare-key service: from €60 transponder, from €200 smart key.
Why can’t a hardware store or mall kiosk copy my car key?
Two reasons. First, most modern keys are laser-cut (sidewinder) — the groove runs down the middle of the blade and needs a high-security machine most kiosks don’t have. Second, if the key has a transponder chip, a copied blade still won’t start the car without programming, which a kiosk can’t do. A cut from the wrong machine often won’t even turn.
Can a hardware store like Leroy Merlin cut my car key?
They can cut a plain mechanical blade — the metal half — but no retail counter or kiosk can program a transponder or smart key to your vehicle, so a chipped copy turns the lock and won’t start the engine. For a pre-immobilizer metal key it’s a fine, cheap option; for anything with a chip or buttons it’s locksmith or dealer work. I compare every route honestly in my guide to the retail-counter option, including what hardware stores and key-cutting kiosks can and cannot do.
Do you cut high-security laser-cut (sidewinder) keys?
Yes. I carry laser-cut (sidewinder) blanks and the machine to cut them on hand. Most domestic and Asian vehicles from about 2010 onward use laser-cut keys. The cut is more precise than an old edge-cut key — which is also why a kiosk can’t copy one.
How long does cutting a key take?
A straight copy is 5–10 minutes. Decoding a lock or cutting to code takes longer because I’m building the cut from scratch. Cut-and-program is 30–40 minutes depending on the vehicle and its on-board security. I give the honest time in the written quote before I head out.
My key won’t turn in the ignition — can a fresh-cut key fix it?
Often, yes. Metal keys wear — every insertion shaves a little off the cuts, and after enough years the blade sits just shy of the depths the cylinder expects. A fresh key cut by decoding the lock (from €60) restores the factory spec, and a stiff ignition frequently smooths right out. Before you book anything, try the free fix: turn the steering wheel gently left and right while turning the key — a locked steering column is the most common “broken ignition” that isn’t. If a crisp new key still fights you, the cylinder itself is worn or failing. That’s ignition work I also handle, quoted per job once I’ve seen the vehicle.
Where can I get car keys cut near me in Tenerife?
If you’re searching key cutting near me, I come to you instead — Otypro cuts and programs car keys at your vehicle anywhere in Tenerife. Plain copies from €40, cut-and-program from €60. No counter queue, no second trip when the kiosk blank fails.
Key takeaways
Car key cutting in Tenerife — the numbers.
- ✓Plain copy from a working key — from €40 (laser-cut blank from €37)
- ✓No original? I decode the lock and cut fresh — from €60
- ✓Copy takes 5–10 minutes · cut + program 30–40 minutes
- ✓At your car — most makes on the road, text me to confirm yours